Introduction

 

Replacing the PALL filter UH219, it is used to filter out mechanical impurities mixed in hydraulic oil and gum, asphalt, carbon residue, etc. generated by the chemical changes of hydraulic oil itself, in order to prevent valve core jamming, throttling small hole gaps and damping hole plugs, as well as hydraulic component rapid wear and tear.

 

Good filtering effect and high accuracy. There are flood detectors installed on both sides, and the installation position can be adjusted according to the on-site pipeline. A visual pressure difference signal device is installed. When the filter element is polluted and blocked to a pressure difference of 0.35MPa at the inlet and outlet, a switch signal is issued to replace the filter element in a timely manner, achieving the purpose of protecting system safety.

 

 

 

Second oil filter model UH219CG16AS08ZGPH

 

Filter element model UE219AS08Z

 

Maximum pressure reaches 42MPa